Two Stage Gasoline

AGW-SR14-30M


Operation
Generator Mode
AC current only · Selector switch set to idle down –engine will idle down when generator is not in use and tank pressure is 175 PSI · Switch is set to full throttle –engine will run full throttle continuously

Welder Mode
DC current only · Engine must be running full throttle · Selector switch must be set to full throttle

Engine: Performance-proven engine with low-oil shutdown · Electric start (battery and cables not included)

Compressor Pump: Splash lubricated cast iron crankcase to extend the hours of performance · Cast iron head for heat dissipation · Durable stainless-steel braided discharge hose for longer life

Generator : Brush-type 2 pole 12V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings

Welder: Amperage selection switch, 170 maximum

Frame : Powder coated ASME coded 30-gallon receiver tank · 3/16-inch base plate to reduce vibration · 14-gauge powder coated two-piece belt guard with 1-4-turn release for quick access to belts

Components: Belt tightening system pulls engine straight to ensure constant belt alignment · Manual drain valves for proper maintenance · Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life · Quality pilot valve unloader

Offering the convenience of three machines in one, this new model combines a 170A arc welder, two-stage air compressor and a 5000-watt generator all in one piece of equipment. Save space, save money and reduce your load capacity with this new combination unit, and with only one engine you will save time on service parts and maintenance as well.
 

View Product Sheet

Specifications


Displacement/Engine 404cc Subaru OHC
Rated Speed 3600 RPM
CFM @ 175 PSI 15.7
CFM @ 90 PSI 16.4
Max. AC Output 5000 watts
Rated AC Output 4500 watts
Cont. on-load @ 90 PSI 3000 watts
Frequency/Voltage 60Hz/120V/240V
Max. Amps (120V/240V) 41.7/20.8 off-load
Cont. on-load @ 150 PSI 2500 watts
Cont. Amps (120V/240V) 37.5/18.7 off-load
Receptacles (2) 120V, 20A GFCI duplex, (1) 120V/240V, 20A twist lock
Duty Cycle (10 min. run time) 150A @ 100%
DC Voltage 50-170A working range

Weights & Dimensions


Net Weight 585 lbs.
Shipping Weight 650 lbs.
Length 46 in.
Width 22 in.
Height 47 in.

Options


AW-6000-1002 Equipment cover -Keeps your equipment clean, dry and looking like new, made from 600-denier vinyl-backed polyester, water resistant, drawstrings to secure cover
AX-0070 Electric start (battery tray, box and cables included)
70-0380 Engine Oil Drain
IX-0001 Vibration Pads

Request Catalog

You are requesting a catalog from Mi-T-M.

* Indicates Required Fields