Kerosene Forced Air - MH-0600-0M10

Limited Warranties:
  • 1 Year Limited

Request a Catalog »

Find a Dealer »

MH-0600-0M10

Heat when and where you want it. Portable kerosene forced air heaters provide consistent and reliable heat for a comfortable work environment. Available in many sizes, they are perfect for heating everything from garages and workshops to warehouses and construction sites.

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles with roll cage design for easy lifting · 13-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug

Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components: Built-in temperature control thermostat with control dial · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-out

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel

For use in workshops, warehouses, garages, construction sites and farms with proper ventilation.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater "Owner's Manual" included with each heater for a complete list of important safety information.

Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.

View Product Sheet »

Specifications

  • Heat Output

    600,000 BTU

  • Hot-Air Flow

    3,000 CFM

  • Air Pump Pressure

    128 PSI

  • AC Power

    120 Volt/60Hz/5.5 Amp

  • Motor Size

    5/8 HP

  • Fuel Consumption

    4.5 gal./hr.

  • Max. Operating Hours

    8.9 hours

  • Fuel Tank Capacity

    40.0 gallons

  • Heating Area

    15,000 sq. ft.

  • Multi-Fuel Capable

    Yes

Weights & Dimensions

  • Net Weight

    320 lbs.

  • Shipping Weight

    376 lbs.

  • Length

    75 in.

  • Width

    34 in.

  • Height

    43 in.

Options

  • No options