HSE Series - HSE-2003-0MG10
- 3 Year Coil
- 1 Year Electric Motor
- 7 Year General Pump
If you're looking for a hot water unit with large volume capacity, look no further. The HSE Series is built for industrial applications requiring more than 20 hours of use per week. The top-fired heat exchanger is both energy efficient and easily accessible for maintenance.
Pump: Direct drive triplex piston General pump with ceramic plungers · Stainless-steel and brass unloader · Forged brass manifold · Thermal relief valve · High pressure detergent injector
Motor: Totally enclosed fan-cooled electric motor with manual thermal overload protection · 35-foot power cord
Frame: Reinforced powder coated steel tube frame with center balanced lifting hook · Flat-free tires
Components: Energy-efficient top-fired heat exchanger designed for convenient troubleshooting and easy maintenance · No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel)
Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F
Unit Includes: Quick connect nozzles - 0°, 15°, 25° and 40° · 50-foot x 3/8-inch steel wire-braided high pressure hose with quick connects, swivel and bend restrictors · Adjustable pressure insulated dual lance · Insulated trigger gun with safety lock-off
4.0 HP, 230V, 1Ø, 18.0A
Burner Fuel Tank Cap.
Burner Fuel Cons.
BTU Per Hour
Weights & Dimensions
Steam -reduces pressure to 350-PSI by adjusting unloader valve counter-clockwise, spray temperatures will rise 240-degree F above ambient with a maximum of 300-degree F
Adjustable thermostat -operator is able to adjust outlet water temperature
Hour meter -Displays the number of hours unit has been in operation
Time delay shutdown -timer will shut unit off automatically when trigger gun is released and timer reaches setting