Pressure Washer Surface Cleaners
Starting An Electric Pressure Washer
Starting A Gas Pressure Washer
Clean Siding With A Pressure Washer
Pressure Washer Detergents
Pressure Washer Extension Wands
Pressure Washer Nozzles
Pressure Washer Safety
Pressure Washing Wooden Decks
Pressure Washer Pump Repair
Stripping Paint
Starting an Electric Air Compressor
Starting a Gas Air Compressor
Using 70,000 BTU Heaters
Using 190,000 BTU Heaters
Starting A Gas Pressure Washer
Setting up a pressure washer is easy and doesn't require any tools. In this video, we show the startup procedure for a gas-powered pressure washer.
Instructions
1Make sure the pressure washer is on a flat surface.
2Check to make sure the water strainer is in place and free of debris.
3Connect a garden hose to the washer and the other end to your water supply.
4Connect the male end of the high-pressure hose that comes with the unit into the water outlet on the pressure washer.
5Slide the plug on the bottom of the gun assembly onto the other end of the hose, making sure the collar snaps into place.
6Select the high-pressure nozzle best suited to your cleaning task. 
7To install, pull back the collar on the end of the gun and wand assembly, attach the nozzle, and release the collar making sure it snaps into place, securing the nozzle.
