Apply

Due to increasing business demand, we are looking for utility workers in our Fabrication department! Are you ready for a fun position with a growing company? Please join our fabrication team in our Laser Bed area! This entry-level position will work with the Laser Department, sorting/organizing parts after they have been cut.

Overview:  The successful applicant will unload parts from the laser beds ensuring the standards of workmanship and safety are maintained. We are excited to bring someone onboard that can learn quickly, have a positive attitude, work well in a team, and who is willing to be nimble in doing various tasks to get the jobs done. Candidates must be cooperative in a team environment, and have a great working attitude

Duties and Responsibilities:

• Checks load for proper raw stock, removes protective materials and empty skids.
• Inspects finished product for compliance with specifications
• Clean and debur parts as necessary.
• Keeps count of completed product on each run and records and disposes of spoilage in designated manner.
• Notifies supervisor of any major incidence of recurring equipment malfunction or poor-quality raw material or production.
• Keeps equipment and work area clean and orderly.
• Additional duties as assigned by manager

Requirements

• Must be able to work independently
• Candidate must be reliable. Regular attendance is required
• Excellent work ethic with the ability to work unsupervised or with minimal supervision while meeting all product quality requirements
• Full time position
  • 1^st shift: Monday - Thursday, 5:00 am - 3:15 pm
  • 2^nd shift: Monday – Thursday 3:00 pm – 1:15 am
• Must be willing to work overtime as required
• Requires frequent standing, walking and bending. Must be able to lift 50 lbs.
• Pre-employment drug test and strength test are required

This is an exciting opportunity to join our team as a key member of the Engineering team at Mi-T-M as a Drafter!

Job Summary:

Lays out complete products and prepares assembly and detail drawings, following the general instructions and directions of a project engineer. Makes various calculations such as strength of materials, weights, simple forces, and specifications. Prepares and organizes bill of materials and cost estimates.

Essential Functions:

• Prepares layouts, assembly, and detail drawings for new or improved products, special machinery design, test equipment, tools, and fixtures.
• Analyzes various design and safety standard requirements to recommends possible solutions or alternate constructions. Also prepares and evaluates tolerance stack ups and potential interference points.
• Provides information when required for cost estimating, such as BOM lists, material nesting, labor, and assembly.
• Prepares concept renderings for marketing and sales aids

Additional Responsibilities:

• Assists in the follow-up of prototype construction with outside vendors.
• Secures quotations and expedites materials and delivery.

Job Qualifications:

• Two (2) years of college or trade school education in mechanical drawing and related areas.
• Ability to move from design concept to finished design, including layouts and tolerance valuation and detailed drawings.
• Knowledge and familiarity of personal computers and software, including 3D CAD (Inventor preferred) and Microsoft platform (EXCEL, WORD, PPT.)

Requirements

• Positive friendly demeanor
• Strong organizational and time management skills
• Ability to work independently and as a team in a flexible environment, requiring attention to detail and confidentiality
• Strong communication skills
• Candidate must be reliable, regular attendance is required
• Excellent work ethic with the ability to work unsupervised or with minimal supervision
• Ability to handle stress while operating with a sense of urgency and using good judgement
• Full time position, 1st shift: Monday-Friday 7:00 AM – 3:30 PM

Pre-employment drug test is required

Due to increasing business demand, we are looking for utility workers in our Powder Coating Department! Are you ready for a fun position with a growing company? Please join our fabrication team in our Powder Coating Department! This entry-level position is a great chance to learn all aspects of the Powder Coating process!

Overview:  The successful applicant will prepare raw material, hang/remove parts from the line, and package finished painted parts, preparing them for shipment. We are excited to bring someone onboard that can learn quickly, have a positive attitude, work well in a team, and who is willing to be nimble in doing various tasks to get the jobs done. Candidates must be cooperative in a team environment, and have a great working attitude

Duties and Responsibilities:

• Prepares and hangs parts on the powder coating conveyor line
• Removes parts and packages them according to company policies and specifications
• Disposes of cleanup residue in proper container according to company safety procedures. Notifies supervisor of need for disposal of any hazardous waste.
• Notifies supervisor of any major incidence of recurring equipment malfunction or poor-quality raw material or production.
• Keeps equipment and work area clean and orderly.
• Additional duties as assigned by manager

Requirements

• Must be able to work independently
• Candidate must be reliable. Regular attendance is required
• Excellent work ethic with the ability to work unsupervised or with minimal supervision while meeting all product quality requirements
• Full time position
  • 1^st shift: Monday - Thursday, 5:00 am - 3:15 pm
  • 2^nd shift: Monday – Thursday 3:00 pm – 1:15 am
• Must be willing to work overtime as required
• Requires frequent standing, walking and bending. Must be able to lift 50 lbs.

Pre-employment drug test and strength test are required

Due to increasing business demand, we are looking for Assemblers in our Production department! Are you ready for a fun position with a growing company? Please join our Production team! This entry-level position works with a team to assemble Hot/Cold Pressure Washers, Air Compressors, Generators, and more! This position requires the operation of hand tools to install fasteners/bolts, interpreting blueprints for assembly, and requires accuracy, ensuring our customers receive the best quality products possible!!

Overview:  The successful applicant will unload parts from the laser beds ensuring the standards of workmanship and safety are maintained. We are excited to bring someone onboard that can learn quickly, have a positive attitude, work well in a team, and who is willing to be nimble in doing various tasks to get the jobs done. Candidates must be cooperative in a team environment, and have a great working attitude

Duties and Responsibilities:

• Checks Customer Specification Sheet (CSS) to determine required assembly, exterior finish on product, and any special options.
• Assembles components by examining connections for correct fit, fastening parts, and sub-assemblies, per customer order.
• Checks stock bins for adequate supplies of sub-assemblies, parts, and fasteners for the particular run.  Checks for designated carton pack.  Contacts material handler if shortages exist or incorrect parts are in bins.
• Checks operating controls and safety stops on conveyor. Checks power and hand tools for correct operation.
• From experience, resolves assembly and packing problems. Reports other problems to line supervisor for assistance.
• At end of run, contacts material handler, clears stock bins and flat cartons of unused items, and prepares for next run.
• Keeps count of completed product on each run and records and disposes of spoilage in designated manner.
• Notifies supervisor of any major incidence of recurring equipment malfunction or poor-quality raw material or production.
• Keeps equipment and work area clean and orderly.
• Additional duties as assigned by manager

Requirements

• Experience in hand assembly on paced assembly line.
• Ability to operate hand tools.
• Must be able to work independently
• Candidate must be reliable. Regular attendance is required
• Excellent work ethic with the ability to work unsupervised or with minimal supervision while meeting all product quality requirements
• Full time position
  • 1^st shift: Monday – Friday 6:00 am – 2:15 pm
• Must be willing to work overtime as required
• Requires frequent standing, walking and bending. Must be able to lift 70 lbs.
• Pre-employment drug test and strength test are required

The Mi-T-M Sales Support Team Serve as the front line of customer contact by way of inbound and outbound calls, email, and fax. Includes complete product knowledge, technical troubleshooting and product sales. If you are an individual who takes pride in your work and achievements, embraces change, and believes that challenges are simply an opportunity, we invite you to apply with our company.

Overview: The ideal Sales Support Representative candidate will have a high level of customer service, understanding sales, and some technical background.  The successful applicant will have outstanding organization and time managements skills; strong attention to detail; excellent communication and interpersonal skills; ability to multitask and good computer knowledge. We are excited to bring someone onboard that can learn quickly, have a positive attitude, work well in a team, and who is willing to be nimble in doing various tasks to get the jobs done. Candidates must be cooperative in a team environment, and have a great working attitude.

Duties and Responsibilities:

• Front line customer contact by way of inbound and outbound calls, emails and fax
• Requires complete product knowledge, proven sales skills, competent technical troubleshooting background, and strong communication skills
• Must demonstrate competency in Word, Excel and data entry
• Previous sales and mechanical skills a plus
• Communicates and collaborates with internal teams and external customers to support sales and building the Mi-T-M brand.
• Additional duties as assigned by manager

Requirements

• Strong organizational and time management skills
• Ability to multi-task, work independently and as a team in a flexible environment, requiring attention to detail and confidentiality
• Strong communication, organizational, proofing and writing skills
• Candidate must be reliable, regular attendance is required.
• Excellent work ethic with the ability to work unsupervised or with minimal supervision
• Ability to handle stress while operating with a sense of urgency and using good judgement
• Ambitious, quick learner, with a positive and friendly attitude
• Full time position, 1st shift:
• Flexibility is a must to accommodate a rotating schedule between the hours of 7:30 am – 5:30 pm Monday-Friday.
• In-house training program will offer knowledge of company products and services.

Pre-employment drug test is required

Are you ready for a fun position with a growing company? Please join our team in our Shipping/Receiving Department! This is a fast-paced position that requires a strong attention to detail but offers the experience of working in all aspects of shipping and receiving!

Essential Functions:

• Transport materials and items from receiving, warehouse, and production areas to storage, staging or other designated areas by hand, hand truck, electric hoist or fork truck
• Sort and place selected materials in racks, bins, containers, or on shelves in predetermined sequence, such as size, type, color, or product code
• Assemble customer orders from stock and production and place orders on pallets, in racks, or containers
• Performs waste processing, organizing and disposing of cardboard and used packaging materials.

Job Qualifications:

• Willingness to operate equipment, including stacker, counterbalance forklift, electric jack.
• Good physical condition, able to lift 50 lbs. safely.
• Willingness to work overtime, possibly some Saturdays.
• Pre-employment drug test is required.

Are you searching for a hands-on position? Please join our fabrication team as a Press Brake Operator!

This is a great chance to be involved in all aspects of the machine operating process!

Duties:

• The successful applicant will interpret blueprints/drawings, change machine tooling, and program various Press Brakes to bend metal products.

Requires:

• Have a technical aptitude for mechanical equipment.
• Solid background working with sheet metal
• Knowledge of tooling and tool maintenance
• Proven measurement and mathematical fraction/decimal and metric conversion skills
• Ability to read blueprints
• Ability to read a tape measure and caliper
• Ability to distinguish material types including Aluminum, Steel and Stainless Steel
• Candidate must be reliable, regular attendance is required
• Excellent work ethic with the ability to work unsupervised or with minimal supervision while meeting all product quality requirements.
• Frequent standing, walking, and bending.
• Must be able to lift 50 lbs.
• Must be willing to work overtime as required.
• Full time position
• 1^st shift: Monday - Thursday, 5:00 am - 3:15 pm
• 2^nd shift: Monday – Thursday, 3:00 pm – 1:15 am
• Pre-employment drug test and strength test are required.

Our success is largely due to the passion and commitment of the people we have had the good fortune to recruit and employ. We are always looking for people who share our values and will serve our customers with integrity and excellence. To reach our greater potential as a company, we recognize that our people are to be encouraged and supported with the tools, technologies, and training that will enable them to achieve their full potential.

If you are an individual who takes pride in your work and achievements, embraces change, and believes that challenges are simply an opportunity, we invite you to apply with our company.

Mi-T-M is seeking welders experienced with MIG welding on 11 gauge and thinner mild steel along with thicker material. Mi-T-M provides a competitive compensation and benefits package that takes into account your welding experience, skills, and expertise.

The ideal candidate will weld different types of material and thicknesses using various welding processes. We are excited to bring someone onboard that can learn quickly, have a positive attitude, work well in a team, and who is willing to do various tasks to get the jobs done. Candidates must be cooperative in a team environment, and have a great working attitude

Duties and Responsibilities:

• Receives instructions, prints, and work orders for the job. 
• Must be able to follow work written and verbal work instruction/procedures
• Fabricates parts by welding various metals by using welding techniques and appropriate welding equipment
• Cleans and prepares surfaces to be welded. Sets up, assembles, and welds parts. 
• Repair defective surfaces.
• Keeps equipment and work area clean and orderly.
• Additional duties as assigned by manager

Requirements

• Requires blue-print reading skills, production welding experience or trade school welding program and the successful completion of a welding test.
• Proficient ability in MIG welding, the use of an acetylene torch, and basic knowledge of TIG welding.
• Work involves varying degrees of precision and control where damage could be considerable.
• Working knowledge of sheet metal
• Strong organizational and time management skills
• Must be able to work independently
• Candidate must be reliable, regular attendance is required
• Excellent work ethic with the ability to work unsupervised or with minimal supervision while meeting all product quality requirements
• Full time position
  • 1^st shift: Monday - Thursday, 5:00 am - 3:15 pm
• Must be willing to work overtime as required

Work Environment:

• While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts
• Requires frequent standing, walking and bending.  Must be able to lift 50 lbs
• Pre-employment drug test and strength test are required