Propane Forced Air Heater - MH-0150-LMT0
MH-0150-LMT0
Convenient and easy-to-use, Mi-T-M propane forced air heaters come in a variety of heat outputs. The sleek design puts heat right where you need it. Just add a propane cylinder and plug into the nearest outlet.
Frame: Heavy-duty steel construction · Easy-lift handle for portability at home or on the job site
Components: High performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · One touch ignition and heat control for easy operation
Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.
Specifications
-
Heat Output
150,000 BTU
-
Hot-Air Flow
400 CFM
-
AC Power
120V, 60Hz, Less than 1.0 Amp
-
Motor Size
1/9 HP
-
Fuel
Propane
-
Fuel Consumption
6.9 lb./hr.
-
Required Cylinder Size
100 lb.
-
Max. Operating Hours (Per Required Cylinder Size)
18.0 hours
-
Heating Area
3,800 sq. ft.
-
Adjustable Thermostat
Yes
-
Adjustable Height Angle
Yes
-
10-Foot Hose & Regulator
Yes
Weights & Dimensions
-
Net Weight
23.00 lbs.
-
Shipping Weight
29.00 lbs.
-
Length
25.10 in.
-
Width
8.70 in.
-
Height
15.40 in.
Options
- No options
