Propane Forced Air Heater - MH-0150-NM10

MH-0150-NM10

The sleek design of the propane forced air heaters puts heat right where you need it. Convenient and easy-to-use – just add a propane cylinder and plug it in.

Frame: Heavy-duty steel construction · Easy-lift handle for portability

Components: High performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · One touch ignition and heat control for easy operation

Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.

Includes thermostat.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

Find a Dealer »

Specifications

  • Heat Output

    150,000 BTU

  • Hot-Air Flow

    435 CFM

  • AC Power

    120V, 60Hz, Less than 1.0 Amp

  • Motor Size

    1/9 HP

  • Fuel

    Natural Gas

  • Fuel Consumption

    146 cu. ft./hr.

  • Required Cylinder Size

    N/A

  • Max. Operating Hours (Per Required Cylinder Size)

    N/A

  • Heating Area

    3,800 sq. ft.

  • Adjustable Thermostat

    Yes

  • Adjustable Height Angle

    Yes

  • Hose & Regulator

    No

Weights & Dimensions

  • Net Weight

    24.00 lbs.

  • Shipping Weight

    35.00 lbs.

  • Length

    25.10 in.

  • Width

    9.00 in.

  • Height

    15.50 in.

Options

  • No options