Kerosene Forced Air Heater - MH-0400-0M11


The portable kerosene forced air heaters provide dependable heat for large areas. They feature built-in temperature control and sure start ignition.

Heavy-duty, cast aluminum enclosed electric motor

Burner Head
One-piece cast aluminum

Easy assembly · Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Flat-free tires

Factory Tested for Multiple Fuels
Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel · Not approved for bio-fuel

Important Notes
-Not for use in residential living areas or inadequately ventilated areas
-Proper ventilation required during operation
-Must be plugged into an approved standard electrical outlet for operation

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.


  • Heat Output

    400,000 BTU

  • Hot-Air Flow

    1,400 CFM

  • Air Pump Pressure

    125 PSI

  • AC Power

    120V, 60Hz, 3.3 Amps

  • Motor Size

    1/2 HP

  • Fuel Tank Capacity

    24.0 gallons

  • Fuel Consumption

    3.00 gal./hr.

  • Max. Operating Hours

    8.0 hours

  • Heating Area

    10,000 sq. ft.

  • Multi-Fuel Capable


  • Digital Temp. Read-Out


  • Error Indicator Read-Out


Weights & Dimensions

  • Net Weight

    143.00 lbs.

  • Shipping Weight

    163.00 lbs.

  • Length

    53.00 in.

  • Width

    21.00 in.

  • Height

    29.00 in.


  • No options
Warranty Information
  • 1 Year
Additional Info