Kerosene Forced Air Heater - MH-0190-0M11

MH-0190-0M11

The portable kerosene forced air heaters provide dependable heat for large areas. They feature built-in temperature control and sure start ignition.

Motor
Heavy-duty, cast aluminum enclosed electric motor

Burner Head
One-piece cast aluminum

Components
Easy assembly · Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Flat-free tires

Factory Tested for Multiple Fuels
Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel · Not approved for bio-fuel

Important Notes
-Not for use in residential living areas or inadequately ventilated areas
-Proper ventilation required during operation
-Must be plugged into an approved standard electrical outlet for operation

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

Specifications

  • Heat Output

    190,000 BTU

  • Hot-Air Flow

    409 CFM

  • Air Pump Pressure

    7.5 PSI

  • AC Power

    120V, 60Hz, 2.5 Amps

  • Motor Size

    1/2 HP

  • Fuel Tank Capacity

    13.2 gallons

  • Fuel Consumption

    1.37 gal./hr.

  • Max. Operating Hours

    10.0 hours

  • Heating Area

    4,750 sq. ft.

  • Multi-Fuel Capable

    Yes

  • Digital Temp. Read-Out

    Yes

  • Error Indicator Read-Out

    Yes

Weights & Dimensions

  • Net Weight

    62.00 lbs.

  • Shipping Weight

    70.00 lbs.

  • Length

    41.00 in.

  • Width

    17.00 in.

  • Height

    22.00 in.

Options

  • No options
Warranty Information
  • 1 Year
Additional Info
  • CSA Certified C&US