This Mi-T-M 3500-watt inverter generator has a very unique open frame design and is ideal for any jobsite. Power multiple tools and equipment while charging battery packs and other sensitive electronics like phones and laptops.
It produces a max of 3500-watts with 3200 continuous and is equipped with inverter technology for reduced size and weight. This inverter weighs only 66 pounds and can easily fit inside a service truck compartment, when it’s not being used.
The built-in CO detector will automatically shut off the generator if carbon monoxide levels become unsafe. Make sure to always operate generators outdoors with proper ventilation.
While the wraparound frame protects vital components, the control panel features multiple outlets, switches and controls. There’s a 120 volt, 20 amp GFCI duplex outlet, a 120 volt, 30 amp twist lock, a 12 volt DC receptacle and two USB ports.
Over here is the engine on/off switch the choke along with the idle switch to control the speed of the engine and conserve fuel.
The LED lights will indicate power, low oil and CO detection while circuit breakers are integrated to protect against overload.
The open frame on this generator makes maintenance a breeze. Check fuel levels with the gauge here on top, use this orange oil cap to check oil levels and on the other side, you can easily inspect the air filter.
Near the air filter is the recoil start. This inverter features a 212cc Mi-T-M overhead valve engine and can run for over eight hours!
Need more power? Use the Mi-T-M parallel port box to utilize the power of two inverter generators at the same time.
Built for powering tools and equipment on and off the jobsite, the Mi-T-M 3500-watt inverter generator is a number one choice.