Accessories
Pressure Washers
Air Compressors
Generators
Air Compressor Generators
Air Compressor / Generator / Welders
Portable Heaters
Water Treatment Systems
Jobsite Boxes
Trailers
Water Pumps
Wet / Dry Vacuums
All Residential Products
All Commercial Products
Pressure Washers
Generators
Air Compressors
Custom Fire Pits
Portable Heaters
Usage: Residential Commercial
Pressure Washer FAQ's
Which is more important PSI or GPM?
PSI and GPM are both equally important when choosing a pressure washer. The PSI refers to the amount of pressure and GPM refers to the flow. You must have the correct combination of PSI and GPM to have the most ideal pressure washing system for your needs.
To clean effectively, a pressure washer must provide a "stripping" action to scrub off the dirt and "flow" to move the dirt away. Think of the pressure (PSI) as the stripping force that is applied to the surface you are cleaning and the flow (GPM) as the rinsing power that carries the dirt away.
PSI (Pounds per Square Inch) refers to the amount of cleaning pressure that the unit can produce.
GPM (Gallons per Minute) is the amount of water that is coming from the unit.
Cleaning Units (CU) is the result of multiplying the PSI by the GPM. Cleaning units gives the customer a measure of unit performance (efficiency) to compare one unit to another. Cleaning units is calculated by multiplying PSI and GPM.
For example:
- A pressure washer with 3000 PSI and 2.0 GPM has 6000 Cleaning Units
- A pressure washer with 2000 PSI and 3.0 GPM also has 6000 Cleaning Units but the rinsing power is greater than the stripping power.
GPM is usually more important to contractors than PSI. Since most contractors use cleaning chemicals to do all of the cleaning, their job becomes one primarily of rinsing the dirt away.
How do I choose between a gas and electric powered pressure washer?
Gas or electric is completely up to the consumer. There are pros and cons to both.
Electric is safe to use indoors because you don't have harmful fumes. Electric motors are usually quieter and require less maintenance than a gas engine. Also, with an electric motor you do not have to have gas on hand and you do not need to fight the rising cost of fuel prices.
With a gas pressure washer you have a couple of different choices when selecting an engine. Also, gas engines don't require a power cord which in turn allows more portability.
What accessories are available for my Mi-T-M pressure washer?
Clean large, flat surfaces faster and easier than with a standard cleaning nozzle. The Mi‑T‑M rotary surface cleaners come in three different diameters, 18", 20" and 28". Each is equipped with a heavy duty nylon brush to eliminate overspray and maintain the distance between the nozzles and the cleaning surface. This combination ensures a balanced and even cleaning pattern.
Rotating nozzles increase your cleaning power and decrease your cleaning time. Rotating nozzles offer spray impact with 25-degree coverage. Mi‑T‑M Nozzles include a filter, to protect the nozzle from becoming clogged with debris, a quick connect and heavy-duty components for long life and reliability. Rotating nozzles can be used on sidewalks, driveways, track vehicles, muddy areas, old peeling paints and concrete surfaces.
Mi‑T‑M Detergents are environmentally friendly, can be used indoors, and are biodegradable. We offer 3 types of detergents: Deck & House Wash, All Purpose Cleaner, Heavy-Duty Degreaser. All are available in 1 gallon, 5 gallon, and 55 gallon drums.
Hose reels are convenient for the storage of hoses and can be mounted directly on pressure washer frames or attached to a wall bracket. Several sizes are available.
Clean hard to reach places such as home exterior and gutter, farm equipment and multi-story buildings by using telescopic extended reach wands. Mi‑T‑M has several lengths to choose from.
Wet sand blasting is an efficient and dust free method in removing coatings from steel and concrete surfaces such as rust, paint, and graffiti.
Click here to see more pressure washer accessories »
