HSE Series - HSE-2003-0MM11

Limited Warranties:
  • 1 Year Electric Motor
  • 3 Year Coil
  • 7 Year Pump

Request a Catalog »

Find a Dealer »


If you're looking for a hot water unit with large volume capacity, look no further. The HSE Series is built for industrial applications requiring more than 20 hours of use per week. The top-fired heat exchanger is both energy efficient and easily accessible for maintenance.

Pump: Direct drive triplex piston Mi-T-M pump with ceramic plungers · Stainless-steel and brass unloader · Forged brass manifold · Thermal relief valve 

Motor: Totally enclosed fan-cooled electric motor with manual thermal overload protection · 35-foot power cord

Frame: Reinforced powder coated steel tube frame with center balanced lifting hook · Flat-free tires

Components: Energy-efficient top-fired heat exchanger designed for convenient troubleshooting and easy maintenance · No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel)

Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F

Unit Includes: Quick connect nozzles - 0°, 15°, 25° and 40° · 50-foot x 3/8-inch steel wire-braided high pressure hose with quick connects, swivel and bend restrictors · Adjustable pressure insulated dual lance · Insulated trigger gun with safety lock-off

View Product Sheet »


  • PSI


  • GPM


  • Horsepower/Motor

    4.0 HP, 230V, 1Ø, 18.0A

  • Pump


  • Plug Type

    NEMA 6-20P

  • Burner Fuel Tank Cap.

    4.0 gallon

  • Burner Fuel Cons.

    1.48 gph

  • BTU Per Hour


Weights & Dimensions

  • Net Weight

    308 lbs.

  • Shipping Weight

    431 lbs.

  • Length

    43 in.

  • Width

    29.5 in.

  • Height

    36.5 in.


  • HX-0233

    Adjustable thermostat -operator is able to adjust outlet water temperature

  • HX-0244

    Time delay shutdown -timer will shut unit off automatically when trigger gun is released and timer reaches setting

  • HX-0235

    Hour meter -Displays number of hours unit has been in operation

  • HX-0241

    Steam -reduces pressure to 350-PSI by adjusting unloader valve counter-clockwise, spray temperatures will rise 240-degree F above ambient with a maximum of 300-degree F

  • HX-0243

    Auto start/stop